- Thank you received: 0
×
Questions about G400/G410 Cards.
Card doesn't wok - DAHDI hook failed returned -1
13 years 6 months ago #6305
by chapeti
I have the same problem as Richard.
Apparently have updated the code in the file "opvx-bristuff-0.4.0-RC3h.tar.gz" on 15/10 and corrected several problems. (About the size of the PDU, the "include stdllib.h", etc.).
I downloaded the new version compiles without problems but I have the same problem as Richard:
CHAPETI * CLI> module load chan_dahdi.so
[October 18 18:31:07] WARNING [4174]: chan_dahdi.c: 1312 dahdi_open: Unable to Specify channel 2: Device or resource busy
[October 18 18:31:07] ERROR [4174]: chan_dahdi.c: 8053 mkintf: Unable to September buffer channel info on '2 ': Bad file descriptor
[October 18 18:31:07] ERROR [4174]: chan_dahdi.c: build_channels 12921: Unable to register channel '1 '
CHAPETI * CLI>
Apparently have updated the code in the file "opvx-bristuff-0.4.0-RC3h.tar.gz" on 15/10 and corrected several problems. (About the size of the PDU, the "include stdllib.h", etc.).
I downloaded the new version compiles without problems but I have the same problem as Richard:
CHAPETI * CLI> module load chan_dahdi.so
[October 18 18:31:07] WARNING [4174]: chan_dahdi.c: 1312 dahdi_open: Unable to Specify channel 2: Device or resource busy
[October 18 18:31:07] ERROR [4174]: chan_dahdi.c: 8053 mkintf: Unable to September buffer channel info on '2 ': Bad file descriptor
[October 18 18:31:07] ERROR [4174]: chan_dahdi.c: build_channels 12921: Unable to register channel '1 '
CHAPETI * CLI>
13 years 6 months ago #6308
by ricardo
Hi!
we have also a HFC-Pci Card, but it is disabled. And only 2 SIM-Cards (Slot 1 and 2, Slot 3 and 4 is empty) in the openvox g400p.
/etc/zaptel.conf:/etc/asterisk/zapata.confAnd one installation error I solved like this way :
http://bbs.openvox.cn/viewthread.php?action=printable&
;tid=1401 (I think chapeti (second post)) had the same error ...
Thanks
i] Last edited by ricardo at 2010-10-19 14:17 [/i
we have also a HFC-Pci Card, but it is disabled. And only 2 SIM-Cards (Slot 1 and 2, Slot 3 and 4 is empty) in the openvox g400p.
/etc/zaptel.conf:
loadzone =nl
defaultzone =nl
alaw =1,3#,5,7
span =1,1,3,ccs,ami
span =2,2,3,ccs,ami
#span =3,3,3,ccs,ami
#span =4,4,3,ccs,ami
bchan=1,3#,5,7
dchan=2,4#,6,8
#span=5,1,3,ccs,ami
#span=6,1,3,ccs,ami
#span=7,1,3,ccs,ami
#span=8,1,3,ccs,ami
#bchan=9-10
#dchan=11
#bchan=12-13
#dchan=14
#bchan=15-16
#dchan=17
#bchan=18-19
#dchan=20[channels]
;GSM
txgain = 0.0
rxgain = 0.0
signalling = gsm
context = from-gsm
echocancel = no
relaxdtmf = yes
group = 1
; slot A
channel => 1
; slot B
channel=> 3
; slot C
;channel =>5
; slot D
;channel => 7
;QuadBri
;language = de
;switchtype = euroisdn
;pridialplan = local
;prilocaldialplan = dynamic
;nationalprefix = 0
;internationalprefix = 00
;overlapdial = yes
;immediate = no
;callprogress = no
;busydetect = no
;callwaiting = yes
;musiconhold = default
;faxdetect = both
;signalling = pri_cpe
;context = s2m-incoming
;group = 2
;channel => 9-20Thanks
i] Last edited by ricardo at 2010-10-19 14:17 [/i
13 years 6 months ago #6312
by svolta
Hi,
Your system kernel is too new for install the bristuff drivers. Here are 3 ways to solve the problem:
1.Give me your Email, I will send you a version of bristuff which was modified for the new kernel.
2.Use the dahdi drivers to install G400P, you can refer http://www.chan-extra.org/index.php/OpenVox_G400P_User_Manual_for_dahdi
3.Changge you OS.
Your system kernel is too new for install the bristuff drivers. Here are 3 ways to solve the problem:
1.Give me your Email, I will send you a version of bristuff which was modified for the new kernel.
2.Use the dahdi drivers to install G400P, you can refer http://www.chan-extra.org/index.php/OpenVox_G400P_User_Manual_for_dahdi
3.Changge you OS.
Time to create page: 0.040 seconds